Home / maximus. / micromax q300 firmwaer@flash file spd7731 pac file vartion=MMX_Q300_SW_V04_HW_V2.04_23032016

micromax q300 firmwaer@flash file spd7731 pac file vartion=MMX_Q300_SW_V04_HW_V2.04_23032016

vartion=MMX_Q300_SW_V04_HW_V2.04_23032016

 micromax q300 firmwaer Download link

Card found: S/N : D80EFE02 , v0135
Chinese Miracle II [SPD module] v 1.24

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

==== Wait for phone…

Phone found! [ 9 ] Port Opened
Sync…
Initial Boot Failed!

Reconnect Power/Cable!
Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

==== Wait for phone…

Phone found! [ 9 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
Boot failed!
DS : Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!
Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

==== Wait for phone…

Phone found! [ 9 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name : Q300
Model Brand : Micromax
Model Device: Q300
AndrVersion : 5.1
BaseBand CPU: Q300
CompileDate : 5/26/2016 10:14:32 AM
Project Ver : MMX_Q300_SW_V04_HW_V2.04_23032016
Model Ext : Micromax Q300

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:21

Reconnect Power/Cable!
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

==== Wait for phone…

Phone found! [ 9 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 9 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 9 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : Q300
Model Brand : Micromax
Model Device: Q300
AndrVersion : 5.1
BaseBand CPU: Q300
Project Ver : MMX_Q300_SW_V04_HW_V2.04_23032016
Model Ext : Micromax Q300

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1821 MiB
Saved to : C:\Users\sk–sohel\Desktop\Q300_Q300_5.1_MMX_Q300_SW_V04_HW_V2.04_23032016_Micromax_Q300\
Done!

Elapsed: 00:11:26

Reconnect Power/Cable!
Operation : Read NV [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

==== Wait for phone…

Phone found! [ 9 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x00032950
Saved to : C:\Users\sk–sohel\Desktop\CX_SPDNV.spdnv

Elapsed: 00:00:24

ALL SMART PHONE OFFICIAL FIRMWAER PASSWORD PROTRACTED ( www.kushtiamobile.com )

ALL ( BARPHONE + BATON MOBILE ) FREE WWW.KUSHTIAMOBILE.COM

SOHEL.SK77@YAHOO.COM = skype id= sohel.rana783

SK.SOHEL.RANA

DUTCH BANGLA=01759994000-7

BKASH= 01759994000

TAKA = 100.00

About S.K. Sohel Rana

Check Also

winmax mh1 filash file@firmwaer free download

Mobile Flash solution SPD CPU: 1. Firstly setup the SPD USB driver your pc. ( …

Leave a Reply

Your email address will not be published. Required fields are marked *